|
 |
 |
|
||
| Use on ledges... | on Windowsills | Can Bend 360 Degrees |
Description:
Lowest Price with longest guarantee make the Spike 2001 the #1 Stainless Steel Spike product recommended by Architects, Contractors and Government Agencies.
Bird Spike 2001 prevents birds from landing or roosting on roof lines, parapet walls, I-beams, window ledges, and more. The no-gap design offers the best option to deter large birds, with an industry leading 10 year guarantee! Bird Spike 2001 comes in 3”, 5” and 8” widths and is virtually invisible when installed! The flexible base makes Bird Spike 2001 easy to install on curved surfaces, and there is no assembly required! Bird Spike 2001 is proudly made in the U.S.A.
Applications:
- Ledges
- Roof lines
- Parapet walls
- Eaves
- I-beams
- Window sills
- Light posts
- Signs
- Awnings
- Canopies
Advantages / Benefits
- Lowest Price with longest guarantee make it the #1 Stainless Steel Spike product recommended by Architects, Contractors and Government Agencies.
- Patented Bend & Crush Design for Permanent Installation
- Manufactured by Bird-B-Gone in the USA
- No-Gap Design. Best Spacing to Deter Birds from Roosting or Nesting
- Non-reflective metal finish
- Fits Any Contour - Can bend 360 degrees
- Two foot sections - cuts labor time in half
Roofs: Use the Stainless Steel bird spikes on roof peaks and edges, as this is where the pest birds will want to land. Pest birds such as pigeons will land on a peak of a roof, looking for food, looking for a place to roost or a sheltered area to build a nest.
Ledges: Ledges and windowsills make perfect roosting areas for pest pigeons and other pest birds. Install the stainless steel bird spikes on the surface to keep them from landing.
Specifications / Installation:
Specifications (pdf)
Installation Instructions (pdf)
Bird Spike 2001 comes in 2-foot strips, and is very easy to install. The Spikes have pre-drilled holes along the base, and can be glued down or nailed or screwed into any surface. For the complete installation guide, please click on the link above.Before installing any pest bird control product be sure to thoroughly clean all surfaces. It is also important to remove leaves, nests and other debris before disinfecting.
Stainless steel bird spikes are easily installed using adhesive or screws.
For Wood: Use #8 wood screws. You will need 6 - #8 wood screws per 2ft. section of bird spike.
For Concrete, Brick or Steel: Use construction grade Adhesive (do not use liquid nails or silicone) to install the bird spikes on these surfaces as well as on rooftops. Run a bead line of adhesive on the under side of the bird spike strip. One tube of adhesive will cover up to 25 feet of bird spike.
For More Information and FREE Samples
Call 1-800-392-6915
